Thursday, September 27, 2012

Trip Report: Van Wyck Mtn Airplane Crash Sites 9/22/12 – 9/23/12

A few months back I did a three day trip where I bushwhacked to an airplane crash site next to Friday Mountain in the Catskills. You can see that trip report here in Part 1 and Part 2. Well, the report of the trip inspired some of my friends from Blades and Bushcraft (Beanbag, Son O’, and Mibuwolf) to do a similar trip. We did some searching around and discovered that on Van Wyck Mountain, also in the Catskills, there were two separate airplane crash sites. On top of that, they were not nearly as remote as the one on Friday Mountain, and could be reached without having to go into the spruce cap where bushwhacking becomes a nightmare. We figured it could be done as an overnight trip. We would be bushwhacking the whole way without catching any trails. Here was the plan:

1-a

We would start at the parking lot on Peekamoose Road, marked as (P) on the map. From there we would take a bearing and go up to the firts airplane crash site, marked as (1). From that site we would take a bearing to the second crash site (2) and follow it there. Then it would be a climb to the top of Van Wyck Mountain. At that point we would descent down the east side of the mountain until we reach the saddle between the two peaks. We planned on camping somewhere in that location. The following day we would go down until we reach Bear Hole Brook, and we would follow it out to the road and parking lot. If you are wondering, the reason why we didn’t want to try going directly from Van Wyck Mountain to Bear Hole Brook is that the side of the mountain at that location looked to be extremely steep.

The trip seemed doomed from the beginning. Here is what the weather forecast looked like on the day before we set out:

weather catskills ny - Google Search-151943

That is, rain with severe thunderstorms on Saturday, and rain with the temperatures going down into the 30s (F) on Sunday. But, we all manned up, pulled out our rain gear and arrived at the parking lot at 9AM as agreed.

We quickly encountered our first obstacle. In our way was a small river, that none of us had paid much attention to. We all managed to make it about half way through by rock hopping, before we realized that there was no easy way to the other side. We decided to take off our shoes and go straight through. It appears that Beanbag decided that was too uneventful, and figured he would throw one of his shows across to the other bank of the river before taking off the other one. Predictably, the shoe landed in the river, but miraculously stayed floating upright long enough for Mebuwolf to run in and get it. After that, everyone managed to cross without a problem.

004 

The initial part of the trip was steep, and slow going. We had to stop often to catch our breath and get water.

036

There wasn’t much time to look around for the wildlife, but during some of the stops, I was able to take a few pictures.

017-2

027-2

077-2

We were lucky in that the rain held out. However, everything was soaked, and the sky remained overcast. Once we started gaining elevation, we entered a thick layer of fog, which made everything dripping with condensation. While it was not technically raining, we felt like we were walking through water.

054

We kept to our bearing, continuing the climb. At one point I started to suspect that we were drifting a bit to the left of our bearing due to the terrain. It was easier to notice from the back of the line where I was at that point. So, when we reached the elevation where we expected the airplane to be (elevation courtesy of Beanbag’s phone), we split up and did a canvas search of the area to our right. Not far from where we were, we saw the airplane wreckage.

114

118

089-2

It looked to be a an old 60’s jet plane. Son O’ was able to identify the model, but I don’t remember what it was. We were very lucky to find it, because we were indeed off of our bearing, and we made a lucky guess where to stop climbing and canvas the area. We thought this would be a good time for a group picture.

129-2

When we were finished looking around the plane, we decided to get lunch, as it was about noon. I had the same crackers, pepperoni slices and dried tomatoes I had on my trip last week.

136-2

After lunch we took a bearing towards the second airplane crash site and got on our way. The fog continued to limit our visibility and cover everything is moisture.

189

The big plus side was that the terrain had more or less leveled out, making the trek a lot more pleasant. I was able to snap a few pictures of interesting plants.

161-2

106

163

101-2

This time we stuck close to our bearing, and before long we ran right into the second airplane crash site.

208-2

218-2

201

216-2

The debris of this airplane was scattered over a very large area. There were pieces everywhere, and what was left was heavily damaged. In the above pictures you can see pieces of the engine block which had fallen apart. We got some rest at the site. I had a quick snack.

236 

From here all that was left to do was the last uphill section of the trip, up to Van Wyck Mountain. For a while, the elevation change was very gradual. Again, I couldn’t help myself and I had to take pictures of random things.

245-2

264-2

278-2

Soon however the elevation started to change quickly. While not the steepest slopes that I have ever climbed, the fact that it had been raining, and everything was wet, made it extremely difficult to climb. The soil kept sliding out from under our feet. We had to do a lot of scrambling to make it up the mountain.

288-2

294

Eventually we made it to the top of Van Wyck Mountain. It wasn’t a particularly exciting place. Between the fog and the heavy tree cover, there wasn’t much to see. Besides, it was getting to be close to 5PM, and with sunset less that two hours away, we had to make our way don’t the mountain in search of a suitable place to set up camp. We descended down the eastern slope, leaving the mountain behind us in the fog.

310

Looking at the above picture now, that cliff kind of looks like a human face. It’s not something I noticed when taking the picture.

We followed the terrain down until we reached the saddle. The whole time we searched for a good camp location, but could not find anything. Everything was covered in rocks and holes. Eventually, we decided to split up and find individual locations where we could set up. We picked a central spot where we made a fire despite the wet weather, courtesy of some fat wood brought by Beanbag and some birch bark that Mebuwolf had collected along the way.

324

I managed to clear out a large enough area to set up my GoLite Shangri-La 3. I had switched to the smaller shelter exactly for reasons such as this one. All that was left to see if if the performance would be good enough.

317

After setting up camp, we ate dinner by the fire. Just as the sun set, the fog cleared, and was replaced by the thunderstorm that we were awaiting. I grabbed my things and headed back to my tent. It was not easy to find in the dark, even with my flashlight. Eventually, I got in, took off my wet clothing, jumped in my sleeping bag. I don’t know if you can see anything from this picture, but it was really coming down.

331

Soon we started getting some lightning. The first one was so close, I was sure it landed in our camp site. Mibuwolf who was watching the storm from his hammock, and gathering the rainwater from his tarp, saw the lightning hit a few dozen feet from where Beanbag’s tent was set up. The rain continued on and off through the night, but was over by the time we got up in the morning. The temperatures dropped into the 30s (F). By the time we got up, they were in the los 40s (F). I had to sleep with both my fleece shirts on in order to stay warm.

The GoLite Shangri-La 3 held up well during the storm. However, I did have a problem. There was a fair amount of condensation on the inside of the tent. I get the same thing with the Shangri-La 5, but with the Shangri-La 3, the footprint is small enough that during the night, the sleeping bag by my feet, touched the wall of the tent. It then ended up absorbing a lot of the condensation, getting it wet. This could end up being a real problem.

So, we all got up, ate breakfast, and packed up as quickly as we could. I don’t think any of us anticipated it to actually get as cold as it did. Combined with the fact that everything was wet, it was not fun weather. We were all pretty familiar with this kind of weather, and knew how to deal with it, but these are the exact conditions in which people get hypothermia.

We set out south, going down the slope, heading towards Bear Hole Brook. Soon we started intersecting small streams that fed into the river. We more or less followed them down until we reached the river.

358-2

The previous evening, while we were heading down Van Wyck Mountain, I had twisted my knee. I have a prior injury there, and it made it very difficult for me to walk down hill. The descent down to the river was very painful. Luckily, the guys were willing to wait for me. Things got better from that stand point once we reached the river and the terrain leveled out.

We did however underestimate the difficulty of walking along side the river. While it was easy from a navigational stand point, the terrain was not easy to follow, requiring us to cross the river numerous times in order to find accessible ground.

367

392

For much of the time, we had to walk along banks covered by stinging nettles.

366

We stopped for lunch near one of the flatter sections of the river. Luckily, the weather was nice. No rain cloud in sight.

374

We also stopped for water, which demonstrated a serious problem with my gear selection. As I mentioned last week, I have replaced my bladder for the Sawyer Squeeze filter with a 1L Platypus bladder. It worked well last week, but this time I could not get a good connection between the bladder and the filter. For some reason the threads would not align. Clearly this is not acceptable. I’ll have to look for a different bladder. I can’t afford to have to play with it each time in order to get it to work. This time, the more I tried, the worse it got, so at the end, I just used a chlorine dioxide tablet.

While the shelter and the filter bag were disappointments when it came to gear, on the up side, I was very happy with my new backpack, the REI Flash 62. SInce the last trip I have managed to get all the adjustments right, and on this trip despite the terrain, it was extremely comfortable. It also held up very well. Initially I was worried that it may get damaged bushwhacking, but it held up fine.

We continued our slow progress down the river. I took some pictures along the way.

408

413

After a while, we reached a point along one of the river banks where there was a clear camp site made most likely by a hunter or fisherman. At that point we knew that we were getting close to the end of the trip.

394

Across the river seemed to be the beginning of a path, most likely the one that these people have been taking to this locations. It wasn’t marked on any of the maps we had. We decided to take it, especially because it was impossible to keep following the river, which was starting to go down via a number of waterfalls.

400

401

We crossed the river and started following the path. Along the side I spotted a chunk of chaga, which Beanbag could not resist.

422

With a backpack full of chaga, we continued down the path until it lead us out to the road near our starting point. It was a great end to a fun and tiring trip.

1

2

The above graphs are the GPS recordings of the trip. They do not do a good job at demonstrating the effort that went into finishing the trip. The wet terrain and slippery soil made things much harder than the elevation map would lead one to believe.

Overall, a great trip with a great bunch of guys. I look forward to the next one.

Tuesday, September 25, 2012

Wetterlings Forest Axe SAW26H Review

As you have probably noticed, I have not done any reviews of Wetterlings axes so far. The reason is that they are a fairly popular manufacturer, and there is lots of good information about their products out there. As it happens however, a friend of mine, Glenn, decided to send me his Wetterlings Forest Axe so I can try it out. I can’t say no to an offer like that, so here is the review of the axe.

247

Specifications:
Manufacturer: S.A. Wetterlings
Axe Head Weight: Listed as 1.88 lb; I would estimate it closer to 2 lb
Axe Length: Listed as 26 inches; 25 inches as measured
Axe Head Material: Carbon Steel; RC 57-58
Handle Material: Hickory
Cost: $120.00

028

Perhaps the main competitor to the Wetterlings Forest Axe is the Gransfors Bruks Scandinavian Forest Axe. At first glance, they appear to be nearly identical designs. That is why here I will compare the two axes. You can see them side by side.

268 

022

The two axes have nearly identical handles in terms of size and feel. The Wetterlings clearly does not have a lanyard hole, while the Gransfors Bruks does. Of course, that does not effect performance in any way. Wetterlings actually makes their own handles in their factory. Gransfors Bruks and the rest of the Swedish axe manufacturers outsource their handle production. It is interesting that despite that both handles are so similar. The grain of the Wetterlings handle (left) is also very good.

a (26)

The head design, while overall similar, has some differences. The Wetterlings head (right) is definitely heavier than the Gransfors Bruks one. Since the Gransfors Bruks head is about 1.75 lb, I estimate the Wetterlings one to be about 2 lb, although the listed 1.88 lb could be correct. The additional weight is mostly towards the front of the head. You can see the difference here:

277

The added weight at the front of the head effects the balance of the axe, making it bit heavy, although I can not notice any performance disadvantage.

312

There has been some talk recently about how each of the heads is made. There has been some speculation that the heads are hand made and the metal folded around the eye. As evidence for the theory, people have pointed out a slight split near the eye of some axes. While from what I have seen, both axes are made the same way on an open dye drop forge from a solid bar of steel, here is the split that people are talking about. You’ll notice that in this instance, it is present on the Wetterlings head (left), but not of the Gransfors Bruks one.

a (17)

In terms of performance, the Wetterling does a better job than the Gransfors Bruks because of the added weight. With such similar designs, the added weight makes a clear difference both with chopping and splitting.

Interestingly, the Wetterlings Forst Axe is virtually identical to the Husqvarna Traditional Axe that I tested earlier. The reason for that of course is that Wetterlings used to make the Husqvarna axes. The results are identical. If you need any further information on the Wettrlings, you can look at the Husqvarna review.

The Wetterlings Forest Axe comes with a leather sheath. Unfortunately I do not have it, so I have not been able to show it to you.

The Wetterlings Forest Axe is a solid performer. It is not nearly as well polished and finished as the Gransfors Bruks Scandinavian Forest Axe, but in terms of performance it more that holds its own. There have been some complaints about the finish quality of the axe, but as a working tool, it meets all expectations.