Thursday, April 7, 2011

An Improvised Work Bench For Re-Profiling Axes

You have already seen several posts about working on the axe head using a file. In my posts you will most often see me holding the axe head in my hand, while filing it with the other. Ideally, you will have a work bench with a vice, which will hold the axe securely while you work. That way you can apply pressure to the file with both hands, making the work go a lot faster. For those of us who do not have a properly set up work space at our disposal, here is a cheap way to get a similar result.
















All you need are two adjustable clamps, which you can get at any hardware store for a dollar or two. Simply place the axe on a sturdy surface, here I am using a ledge, or you can use the side of a table, and clamp the axe head to it. Make sure the clamped area makes good contact with the table surface. If you need, a small piece of leather inserted under the head will provide for a good hold. That’s all there is to it. Now you can take your file and start working on the bit.

4 comments:

  1. i use two quick clamps and a coffe table, or the legd of my deck

    ReplyDelete
  2. Good idea.
    http://woodsrunnersdiary.blogspot.com/

    ReplyDelete
  3. good idea. perfect for this urban apartment dweller without a garage.

    ReplyDelete